192.168.0.200 Login Admin (Username & Password)
Login on 192.168.0.200
You need to click on the LOGIN Button below to Access to your Admin PanelLogin
What is 192.168.0.200?
If you are on a private network, only you should be able to connect to the Internet at 192.168.0.200. Modems, routers, and other network devices can utilize this IP address. This is a unique IP address reserved for modems and other wireless routers. TRENDnet is the primary user of this IP address (192.168.0.200). Routers do not always utilize the same IP address. Many IP addresses have been used to obtain access to your Wireless Bridge, bridge, or control panel, including 192.168.1.1, 192.168.0.1, and 192.168.2.1. This fixed IP address is known as the "Default Gateway IP." You must have the login information for your router right now. You have come to the correct place.
List of Router Usernames and Passwords for 192.168.0.200
Good! The old username and password for your router are still valid. The default credentials are listed below. Select your router from the list below:
For Linksys routers and other brands of network hardware, the default gateway IP address is 192.168.0.200. 192.168.0.200 is the IP address for router admin access. Typically, network administrators configure router admin access to this IP address. It is possible to handle IP Quality of Service (QoS), Domain Name System (DNS), Proxies, Local Area Networks (LAN), Wide Area Networks (WLAN), DSL, ADSL, MAC, and WPS Block.
How to Easily Login to 192.168.0.200
There are steps for easy login to 192.168.0.200:
- You can access the software's settings and adjustments by entering the IP address 192.168.0.200 into your router's administrative interface.
- Click here or type 192.168.0.200 into the browser's address bar.
- If you still have problems, your router's IP address is not 192.168.0.200.
- When you have found the IP address for your router, you should enter it into the address bar of your web browser.
- After that, the login screen will load and request that the user log in.
- Enter both the username and password for the router.
I Forgot the Username and Password for My Router's 192.168.0.200 IP Address (How Should I Do?
You Never changed it? Try to find them in the list, otherwise to turn the router back to factory settings, you need to hold on the button for 10 seconds using a needle or toothpick then you will be able to find the defaults credentials for 192.168 in the list :)
- It is as simple as restarting your modem. Simply pressing the reset button (usually located on the base or back of the modem) will achieve this.
- Pressing and holding this small button for approximately 20 seconds will return your modem to its original factory settings (you might need a toothpick for this).
- In case of forgetting your login or password, you can recover it by using the information from our default router usernames and passwords if you have not changed the username and password factory-set on your router.
- This applies only if you have not modified these settings.
- You will have complete access to all network settings after you log into the router's control panel.
The login information for 192.168.0.200 is listed below.
Router Username and Password List
Suppose you are still using the router's default login and password. The basic login information is shown below. Select your device from the list to view the appropriate router setup page.
|Router Company||Model||Login IP||Username Password|
|2Wire||2Wire 2071-A||10.0.0.138 192.168.1.1 192.168.0.1|
|2Wire||2Wire 2700HG-D vQT04-22.214.171.124||192.168.0.1|
|2Wire||2Wire 2701HG||126.96.36.199 188.8.131.52 192.168.1.0|
|2Wire||2Wire 2701HG-D Qwest||184.108.40.206 220.127.116.11 192.168.1.0|
|2Wire||2Wire 2701HG-G||18.104.22.168 22.214.171.124 192.168.1.0|
|2Wire||2Wire 2701HG-G Qwest||192.168.0.1 192.168.1.0 10.0.0.0||(none) | Wireless|
|2Wire||2Wire 2701HGV-W||192.168.1.64 192.168.1.253 192.168.1.0|
|2Wire||2Wire 3600HGV||192.168.1.64 192.168.1.253 192.168.1.0|
|2Wire||2Wire 3800HGV-B||192.168.1.33 192.168.1.250 192.168.1.0|
|2Wire||2Wire 3801HGV||192.168.1.0 10.0.0.0|
|2Wire||2Wire 5012NV-002||192.168.1.0 10.0.0.0|
How to Find the IP Address of Your Router?
If you cannot connect to your router at 192.168.0.200, your network may use a different address, such as 192.168.0.1, 10.0.0.1, or 192.168.2.1. (slow loading or no loading at all). Check out our IP address list for routers if that is the case. If you need more assistance, visit our article on determining your router's IP address.
Go to 192.168.0.200